|
#1
|
|||
|
|||
BB Edelbrock heads
I just wanted to give some real world results on these heads. My dad had a high 12 second car in the quarter mile, now he has a high 11 second car!!!! With no other changes he dropped a full second. So anyone that runs anywhere in the 12's before you put these heads on might want to think about a roll cage too. They are great heads!!
|
#2
|
|||
|
|||
wow
What are the rest of the specs on your Dads motor? I am using a performer rpm cam and intake on my 440 with mildy ported 452 heads....i wonder if the heads would help my car out that much...
|
#3
|
|||
|
|||
His 440 has the mopar 284 cam, M1 single plane, 950 holley hp, 10.1:1 compression, hooker headers, roller rockers, MSD and a 3.91 rearend. It's a streetable combination that runs very fast. Edelbrock made a great product. Hope this helps. Good luck.
|
#4
|
|||
|
|||
68 charger ,What were the mods to the steel heads if any also what casting No.s were they. Pure stock vs. bowl port and exhaust ported and combustion chamber cc,s make a big difference. From the gain that your dad got Id, say his heads were bone stock with fat 90cc combustion chambers. I have a set of Eldebrocks 84cc,s shaved down to 72cc,s and am excited to compare them to my 74cc home ported 906,s also shaved .100 witch I am very proud of. The intake ports definitly look like they will flow much better than the 906,s definitly a good design by eldelbrock. The exhausts look comparable , once openend up on the 906,s they look the same. My comparison will go head to head this spring thats why I am interested in the mods done to your dads heads so that I cant get maybe a little better preveiw of things to come this spring.Sport
|
#5
|
|||
|
|||
Sport, the heads he had on before the Edelbrocks were stock non ported 346's. Good luck with your motor, i think you will be very pleased with the results.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Edelbrock Heads | matts dart | Rear Wheel Drive - Parts Wanted | 0 | 03-25-2004 08:47 PM |
BB Edelbrock heads | AJ | Performance Talk | 23 | 02-25-2003 05:56 PM |
Edelbrock Heads + N20 = 8.96!!!! | MoparBilly G | Drag Racing Forum | 8 | 10-14-2002 10:06 PM |
edelbrock heads | prostreetchallenger | Performance Talk | 1 | 04-28-2002 09:11 AM |
Edelbrock heads | 67 plymouth | Performance Talk | 1 | 07-31-2000 06:40 AM |