Which plug wires for 360 w/TTI headers?

[Dartcustom]

Hi guys, and gals. I am wondering what style plug wires, and more importantly which style boots everyone is using on a smallblock w/TTI headers? straight, angled, adjustable, or alittle of all? Thanks for any info you have. -Dartcustom

[Jims451]

I don't have the TTI headers, but I like the Jacobs Vari-Angle spark plug wires. They look like a straight plug wire, but have a 15-degree bend in them, and they can be bent even more if needed. They also have a lifetime garentee, but cost about $70 per set.

[demonized340]

I prefer the Accel 300+ 8.8mm plug wires.
I told my friend about them and he is very pleased by their perfofmance.I think mopar performance makes bendable extensions which connect to your spark plugs and wires then bend to fit your application.
hope this helps you!

demonized340

[Dakaty]

I've got the MSD Superconducter wires on my 5.9 with Gibson headers. I have the straight boots. In my opinion the four rear cylinder wires (6&8 & 5&7) wires are too close to the headers. The MSD boots are longer than the stock ones, stick out further and are too close to the headers.

I think angled boots would probably work much better with headers. I assume the angled boots would feature a long enough straight boot which would fit into the stock metal spark plug heat shields (metal tubes around spark plug boots).

[Toddd]

We used the mopar performance wires. Straight boots . They fit and don't hit the header any where. Toddd