|
#1
|
|||
|
|||
MP Cast Al valve covers. Need to Drill??
Do the MP cast aluminum valve covers need to be drilled for PCV and breather?
What size bits do I need? Thanks!! |
#2
|
|||
|
|||
On my MP cast valve covers, all I did was knock out the area (the bare round spots) with a screw driver. It's made thinner in that area so it can be knocked out that way. Hope that helps.
|
#3
|
|||
|
|||
yes they do. but be careful on how you punch them out. they make a grommet kit for them because they are a little deeper than the factory orginal ones.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cast Aluminum 6.1L Gen3 Valve Covers | aarracer | Parts Wanted | 0 | 06-17-2012 03:04 PM |
Cast aluminum valve covers. How tight do you torque them? | 340_GTS | Performance Talk | 5 | 05-25-2011 08:20 AM |
action plus & cast valve covers | lgorton | Performance Talk | 5 | 04-09-2004 09:37 AM |
Noname cast alum valve covers? | 99 DeSoto | Performance Talk | 3 | 01-25-2002 01:22 PM |
Magnum Black Cast Valve Covers? | StarBandit | Ram Truck Chat | 34 | 04-09-2001 11:14 PM |