Cummins Intercooler

[DodgeMan79]

This is an off-the-wall, hypothetical question. Could a Cummins Intercooler be used with a Powerdyne Supercharger? Powerdyne does not make any intercoolers for their superchargers. I just got some info on a company called Spearco Intercoolers. I may give them a call soon and see what they might have. I was wandering about the Cummins Intercooler since it's designed for Dodge trucks.

[ol ron]

work, unless the pressure exceeds the Cummins design limit. You need to know the max your blower will provide, and then check with Cummins on the rated pressure of their intercooler. Also check on the rated flow volume to be safe.
Ron

[Rammer_eight]

I can tell you the Dodge air to air will hold at least 100PSI there are few guys that can atest to this with them in their diesels.

[DodgeMan79]

I haven't checked here in a while. My powerdyne supercharger is setup to run 9-11 psi max. I not know the flow rate of it though. I've read there is about a 1 psi drop on the Cummins intercooler. If thats that case then it just might work.