"Tail pipe" Over the rearaxel on E-body!!!!

[Olle B]

Hi
Im trying to restore the exhaust system on my Challenger R/T 383.
Please can somebody who have a correct tail pipe do me a favor!Sometime during the 30 year of history for my pipe its been welded on the muffler and resonator and since the rear one isnt correct they change the angle of the tip.
So ...........
If you put a correct pipe on a straight surface the Q is:
Whats the distans between the ends.
if you press the bow to the surface how much do the tips raise,lets say to bottom edge of the tube,are the ends pointing in different direction?
Anybody been driving his/her Challenger without the resonator and instead a staight piece of tube?
Ive seen the oposite combination but I think you have to see the muffler to get the right impression of the rear.......
Thanks in advance Olle B Sweden

[cudacarl]

Hey- Must Be Pretty Cool Running Around Sweden In A Challenger. I Was There once when i was 5 visiting relatives. Beautiful Country. Try Talking to these guys at http://www.accurateltd.com/ebody.htm. I have a '73 340 cuda and i'm thinking of going with their exhaust - Good luck !

[70Ted]

I run my 440 challenger r/t with no resonators and the factory mufflers.

[Olle B]

To both replyers!
Yes its cool to drive a Challenger,but I guess its the same where ever you live!
The fact my car is a true R/T Conv dosent make it any worse or...................
By the way,we have a lot of very good mopars and musclecars all kind in Sweden since the major importwave end of 70:ties
Havent got any answer from Accurate yet!!??
Anybody reading this who have the tube and can help me with the messuring?
Olle B