451Mopar

[phoenix]

Attention 451Mopar, You had asked, or had questions in regard to "where a person could purchase a certain stroker, or rather how it could be built for $10,000?" The answer is in CANADA. Due to a sort of "regional economics" involved in the acquisition of parts, and a .61 cent labor dollar, you can in fact purchase an engine exactly as described, brand new, assembled, for that amount. Jim, please call me at 403-203 2525 for more information, sorry, I couldn't get your email to work. Ask for Bob

[Jims451]

If I rember right, the stroker engine involved a NEW mopar Mega Block, Forged (aftermarket) stroker crank, aftermatket Rods, forged race pistons, Some type of aftermarket, ported, Aluminum heads, roller valve train, etc complete engine from induction system to oil pan?
I think this was for a large CID engine that makes 800+ HP?
$10,000 is pretty inexpensive for an engine that uses so many new and expensive parts, and all the extra labor for machine work and porting.

[phoenix]

The description of the engine is as follws
NEW Mopar Siamese Mega Block $2720 cnd.
New Eagle 4340 Crank (offset ground to 4.280") $1190. cnd
NEW Eagle 7.100" Rods $1050. cnd.
New Ross Forged Pistons $1100. cnd.
New Indy S.R. Heads( 350 cfm.) extensive port work $3,500.cnd.
New Indy 440-2 Intake $480. cnd.
New Comp .650" Solid & Lifters $350. cnd.
NEW EVERYTHING!!!
etc. TOTAL $10,300 CND, leaves $6,000 cnd. for machining, rockers, pushrods, rings, brg.'s, pump, pan & pickup, t-chain/gears, gaskets, porting, etc.

ALL NEW!!!! Intake to 8 qt. Moroso Pan
Assembled and Crated, Can be built in Canada and resold elsewhere for 10,000 U.S. Dollars!!!
Expected H.P. @ 725, Torque @ 640 ft./lbs.
Can Dyno or teardown for documentation if you wish more info on the build/ Blueprint of clearances/ specs/ Flowsheets.

REMEMBER $10,000 U.S. Dollars = $16,300. Canadian!!!