|
|
|
#1
10-05-1999, 03:09 AM
|
|||
|
|||
Anyone have any information on installing daytime running lights on a Ram? I believe they are required in Canada but I'm not sure.
|
|
#2
10-05-1999, 03:21 AM
|
||||
|
||||
DRL's are controlled by the PCM (computer).So you would have to change that at least to have DRL's.I'm not sure what else would need to be changed over also.
|
|
#3
10-06-1999, 01:33 AM
|
|||
|
|||
|
You can purchase modules to run DRL's from a variety of sources. (The only one that comes to mind off the top of my head is Galls (http//www.galls.com ) If you gothrough them, be certain to talk to their tech support staff to be certain you're getting the right module).
Hope this helps.
|
|
#4
10-06-1999, 04:48 AM
|
|||
|
|||
|
Thanks for the information. I will let you know how things work out.
|
|
#5
10-08-1999, 02:24 AM
|
|||
|
|||
|
DRL's have been on Mopars in Canada since 1990. There is another module that goes with the onboard computer. This module costs about $200.00. I had to replace one on my wifes rig, and could not find one in the States so had to go to Canada and purchase the module. If you have the harness and module it is a simple set up, but spendy. Good luck
|
 |
|
|
Linear Mode
