|
#1
|
||||
|
||||
67 Coronet (Projrct) FOR SALE $2700
Reason For Sale ! I just Purchased a 69 Dart GT PROJECT, with a
416 / 340 ( 340 Bored .060 4.07 x 4.00 = 416 ) .030 over __________________________________________________ ____ F O R .... S A L E !!! (Located in Bellingham MA) 1967 Dodge Coronet W/ 1966 Nose ( Purchased it this way ) Auto on Column Split Bench Seat Very-Very Solid Floor.. Inner Fenders as well as Fenders -- Trunk Floor had a bit of Rot under the Spare Tire (Covered Now) Stainless Steel Across the Rear - where the Bumper Fits, the Lower Trunk Extensions, and the Inner Wheel House.. REPLACED Lower Quarters with Year One QUARTERS It is Painted AUDI Ginster Yellow Comes with a 1/4 Gal. of Paint to Finish Jambs PROJECT JUST NEEDS FINISHING SHAVED ALL of the Following Openings !! Mirror, Antenna, Fender Mounted Directional, Body Side Molding, and both the Coronet Badges Across the Hood, and on the Quarter Panels (another words I filled them in ) For Pix e mail Request to e mail ONEBADSIX@aol.com ALL PARTS NEW UNLESS OTHERWISE NOTED ITEMS Which Are NOT INSTALLED (mostly all Year One) Interior Floor/Roof Painted with Corroless from Eastwood Trunk Re-Seam Sealed Door Weather Strip Trunk Weather Strip Roof Rail Weather Strip (for where the window meets the roof line) Hood to Radiator Support Rail Seal Window Strip Felt Kit Body Bumper Kit Door Frame Plug Kit Glove Box Liner Sunvisor Tips Chrome/Over Plastic Arm Rests Bases (front / rear) USED Black Arm Rests (Good Cond) Hounds Tooth Trunk Floor Mat Carpet Perforated Headliner / with Clips Headliner Installation Kit Headliner Glue Rear Seat Jute Pad Rear Seat Divider Black Particle Cardboard Package Tray Jute Pad (not and OEM part) Package Tray with Speaker Holes Wiper Washer Bottle Battery Tray / with 2 Support Braces Complete Eng Bay/Forward Wiring Harness Factory Retaining Straps/Clips for the Wiring Harness Reupholstered Seats Front/Back (Locally Done-Not Year One) Decent Bumpers Tires 245/60/15 (rear) and 225/60/15 (front) () ITEMS That Are INSTALLED Stock 360 Bottom End ( Low Miles ) / with the Following Upgrades Heads Milled .030 Ported / Polished (myself) I Have Pictures of the Work Done Stock Valves Purple Shaft Cam 280* x .474 Mopar Lifters Mopar Rockers Edlebrock Valve Springs up .509 lift Cloyes Double Roller Timing Chain Melling High Volume Oil Pump Melling Hardened Distributor Gear Shaft Mopar Oil Pan / Screen-Pick Up / Dip Stick Melling High Volume Water Pump ( 8 vein Impeller ) Carter Fuel Pump (7 psi unit) Edlebrock RPM PERFORMER intake USED 273 Old Style Valve Covers Schumacher Motor Mount (Driver Side) New Pass Side and Trans Mount (Local Parts Store) Dynomax Headers (still in the box) Custom Aluminized Dual Exhaust --- (Cut approx where the headers will drop) Flowmaster Loudest Mufflers ( I think 50 series) USED 727A Transmission Low Miles 2800 Stall Speed Converter 360 Notched Flex Plate (for proper balancing) Transmission Oil Cooler (new in box) U-Joints 8 3/4 with stock rear end ( I believe 2.94 ) $2700 I have more than two and a half tmes that into it ( for more info Call DON 508 212 1961 Noon to Midnight 7 Days a week ) If You would like some Pictures (jpg or bmp) Please E-Mail me (only a handful on computer) ONEBADSIX@aol.com I Have around a 100 plus Pictures from Start to finish (the bulk of which are not scanned in) |
#2
|
||||
|
||||
SOLD
SOLD
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
70 Coronet project...body work is done! | WayneT | Rear Wheel Drive - Vehicles For Sale | 0 | 09-27-2011 07:54 PM |
unfinished project for sale | pwdart | Trucks - Parts for Sale | 2 | 09-06-2005 09:08 PM |
65 Coronet project car questions | sailbode | Vintage MOPAR chat | 2 | 08-01-2003 06:24 PM |
Newbie restore project...65 Coronet | sailbode | Vintage MOPAR chat | 4 | 07-01-2003 02:24 PM |