|
#1
|
|||
|
|||
Ok, had it.. The ol' 3310-2 is a distant memory (kinda surprised the EPA, hasn't been by yet!?) Gonna start fresh (I hope..) 74 Charger/400/4bbl/727 all stock except supercoil and 8mm wires. Have dual exhuast. What carburetor (mfg/mdl/cfm) should I be looking for? Want to run the engine (67k mi orig) as is till rebuild is needed, and use same carb for rebuilt engine when the time comes (slight over-bore, mild cam, headers) Appreciate any advice, Rob
|
#2
|
|||
|
|||
If you plan on a rebuild later and a carb that will handle the mods, and stock running, I would go with a 750 holley. Stock jetting should be good for stock running, and depending on what cam, etc. you are going to install, you can change the jets and set it up the way it should be.
|
#3
|
|||
|
|||
HOLLY 3310 With vacume secondaryswill do fine, but get the holly tuning book also ( year one) or others
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Truck starts better AFTER carb cleaner spray into carb? | Eternalfootman | Ram Truck Chat | 4 | 06-27-2009 10:44 AM |
Trying to buy carb rebuild kit, carb #s? | oibrownskin | Performance Talk | 1 | 03-30-2007 06:25 PM |
Carb ??? | JLM440 | Performance Talk | 2 | 10-09-2006 02:09 AM |
old carb/new carb settings | Rods67Cuda | Performance Talk | 3 | 08-23-2005 10:45 AM |
carb and? | littlecampbell | Performance Talk | 8 | 05-11-2002 11:32 AM |