|
#1
|
||||
|
||||
69 Drum to Disc...
I want to convert my 69 Dart GT to front discs but I am not sure which parts I'll need. It is a V-8 car so I am assuming I won't need to change the K-Member but any help with what to do/get/buy/change would be greatly appreciated.
|
#2
|
||||
|
||||
Been there, done that
I did the same thing to my 69 dart custom.
like any late swap, you need spindles, calipers, caliper brackets, rotors, pads, master cylinder, proportioning valve and hoses from a 73 to 76 A body.(assuming your switching to big bolt at the same time) Lower control arms and cross member stay the same. Only difference with the early A body, is you need to change the upper control arms too. (I think thats because of the size difference in the ball joints, not sure but I do know you have to do it.) It's fairly easy. I also put 11" drums on the rear of mine at the same time, found it braked well, with well ballanced proportioning to all the wheels. The only problem I had, was that I used the spindles, with the calipers in front of the wheel. They interfered with the stabilizer bar. Easily resolved by using shorter link kits, so the bar wasn't in the way of the caliper. If your going to do it with small bolt stuff, you have to find a small bolt car, and get spindles,calipers, hoses,master cyl, prop valve, off of it and install. Good luck finding the stuff though. |
#3
|
||||
|
||||
I had the same Q? On " discs breaks on a 69 A body" Look it up
|
#4
|
||||
|
||||
Hey dart, I have a great article on this swap complete with part numbers and everything you could ever want to know.
I have it on computer, so if you give me your email, I will get it out to you. Good luck, and by all means, be careful doing this swap. It is real important to get the right parts. Kevin |
#5
|
|||
|
|||
|
#6
|
||||
|
||||
You live and you learn!!! I had to email the guy who wrote that article to get it, had no idea it was on the net!!!!! plus, my copy does not have photos, bonus!!!!!
|
#7
|
||||
|
||||
Thanks for the assist!!! That ought to help a lot...now to just get my hands dirty and do it...well they've been dirty before, not like it hurts or anything. Again thanks everybody!!!
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
drum to disc on a 66 b body | 5th Ave Sleeper | Performance Talk | 3 | 05-29-2008 06:14 PM |
Drum to Disc? | 383polara | Restoring your MoPar (Tricks & techniques) | 7 | 03-26-2008 05:05 PM |
drum to disc | joe novoa | Vintage MOPAR chat | 4 | 03-01-2002 11:06 PM |
Rear Drum to Disc conversion | Ron Henry | Ram Truck Chat | 3 | 07-27-2001 10:51 PM |
Drum to disc | oleblue | Vintage MOPAR chat | 4 | 09-29-2000 02:49 AM |