|
#1
|
|||
|
|||
727 tranny, will it work.........
Hi! I've been searching for a good cheap 727 for a 360. Well, come to find out, one of my college buddies has one, but is for a big block. My question is, can u unbolt the big block bellhousing, and bolt up that tranny to a small block bellhousing??? If so, my search is over, but if not, oh well. Anyways, any info would be helpful!
|
#2
|
|||
|
|||
The 727 case and bellhousing are a single piece casting, the bellhousing is not removable. Only a small block 727 will mate to your 360.
|
#3
|
|||
|
|||
Ok, thanx, thats what I needed to know! For now, I have a 904 lined up for the 360, but will continue the search for a 727. Thanx again!
|
#4
|
|||
|
|||
727
I lucked out when looking for a727 for my 360.I found a old Dodge motorhome in a wrecking yard with a727 in it.This tranny had the 4 pinion planetaries and was rebuilt with heavy duty bands and clutches.So if you find an old motorhome being parted out take a look,this tranny was only 50 bucks!
|
#5
|
|||
|
|||
Check any fullsize vans you find in the wrecking yards too. I think most, if not all, smallblock vans had the 727 in them.
|
#6
|
|||
|
|||
My '86 Ram van has a 318 with a 904. Any 360 car or truck should have the 727 though.
|
#7
|
||||
|
||||
my '72 roadrunner has a 727 HD in it, and my brothers '71 sattellite has a 727 as well, i have a 340, he has a 440, i'm pretty sure they can be swapped even though he has a BB and i have a SB....they have both been tore out at the same time and the only diff we saw was he had the kickdown linkage, and i had a vice grip ni-tied back for constant high pressure....
|
#8
|
|||
|
|||
The big block and small block have entirely different bellhousing bolt patterns. Look closely at the pic and the difference will be obvious. The big block is on the right.
|
#9
|
||||
|
||||
ahh...we didn't look at that, good point. i admit, i was wrong...oops! thanx for clearin that up.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
727 Truck Tranny vs. Car Tranny | 66 Coronet in CO | Vintage MOPAR chat | 9 | 02-15-2007 10:34 PM |
tranny work | Pootus | Performance Talk | 5 | 09-19-2003 05:40 PM |
work | tcvpar | Ram Truck Chat | 9 | 07-28-2002 11:28 PM |
tranny problem, help (Not a tranny expert)?(Long) | tooomuch2 | Performance Talk | 4 | 04-14-2002 10:34 AM |
Will my ECU work with a 408 | Rossi | Performance Talk | 1 | 12-03-2000 03:34 PM |