|
#1
|
||||
|
||||
stock 346 head cc's
I have a set of stock set of "346" heads on my big block and was wondering BALL PARK how many cc's they are.
I realize that it is impossible to tell exactly without cc'ing them, but does anyone out there know what the factory says they are supposed to be? mine are not milled or modified with the exception of the bigger valves 2.14/1.81 |
#2
|
||||
|
||||
according to the info I have the 1971 346 heads are 79.5 cc's and the 1972 and1973 are 81.95 cc's .I hope this helps you .
|
#3
|
|||
|
|||
Those are blueprint specs; the reality is propably in the 90cc range.
|
#4
|
|||
|
|||
As I recall, my 346s measured 90-92cc, and that was with extended reach plugs, and before the valve job, so the chamber was as small as it could be before decking.
|
#5
|
||||
|
||||
thanks for the info guys.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stage IV/V/VI rockers on stock head | pishta | Performance Talk | 7 | 10-05-2005 02:36 AM |
Max lift for stock head | pishta | Performance Talk | 1 | 09-27-2005 11:59 AM |
FS: stock tape head unit and k&n | Eric111 | Trucks - Parts for Sale | 1 | 05-12-2002 02:01 PM |
Amp installation to stock head | Ramtacular | Ram Truck Chat | 24 | 04-23-2001 10:46 AM |
New Old Stock T/A Head Castings | Hemichuck | Rear Wheel Drive - Parts for Sale | 0 | 08-24-2000 04:28 PM |