|
#1
|
|||
|
|||
Valve Springs .509 Cam ?
Okay... Here's an easy one... I am replacing the springs on my 440 this year... What's a good replacement spring for my 440, .509 cam... It still has the stock valvetrain...????
Thanks in Advance... Sublime440 |
#2
|
|||
|
|||
Looking in my Crane Cams Catalog, it looks like they recommend a dual spring part# 99893, Should have about 120# closed pressure?
I have a set of Crower part#68302 valve springs that might work? They are single /w Dampner springs rated at only 100# closed, but they are fairly stiff. I think the spring rate is close to the valve springs above? I lost my Crower Catalog, and I don't have acrobat reader installed on my computer so I can not get the information from their web page. I had these springs in my 383 for about 4,000 miles, then I installed the next size up dual springs in the 383. If you want to try these valve springs let me know. I'll sell them to you for $20 if they work, if not just return them to me. My phone # 303-893-6853 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
valve springs | darkside | Performance Talk | 4 | 10-10-2006 12:04 PM |
valve springs ok | lvlrlvlopar | Performance Talk | 4 | 08-23-2002 12:43 PM |
Valve Springs | ROBGTS | Performance Talk | 2 | 01-07-2002 12:58 PM |
077 valve springs | 70gtx | Performance Talk | 1 | 11-16-2000 08:56 AM |
Valve Springs | slepr1 | Performance Talk | 3 | 06-06-2000 12:27 AM |