|
#1
|
|||
|
|||
intake and heads poll
I have a mild 383 with 9-1 pistons and and a .467/.494 lift. Currently I am using an Edlebrock Performer RPM and stock 906 heads.
I was wondering what intake and head combinations everyone else is using. I'm looking to change it up to get a liitle more power. |
#2
|
||||
|
||||
Are your heads ported. If not, then I would purchase Edelbrocks heads and step up in cam lift. A stick from Hughes has high lift and quick opening ramps. 1.6 rockers as well. 750-770 cfm carb.
|
#3
|
||||
|
||||
Currently I am running ported and enlarged 906's on my 383 with a Plain Performer, a .477"/.480" lift cam, and a 770 cfm Holley. I have not had a chance to really get on the motor yet, but it idles and revs real nice. If I knew about the Edelbrocks when i built the motor I would have gotten them, but you know how things go. Right now my intake is probably a tad too weak for my combo. A performer RPM with the edelbrock heads and 1.6 rockers are my ultimate goal, but I need a good place to start.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Intake & Heads | repomann | Parts Wanted | 1 | 06-17-2009 08:29 PM |
BEST SHIFTER POLL - (Poll Only) | NZ 440R/T | Polls Forum | 0 | 12-03-2003 06:04 AM |
intake and heads for 318 | dink6676 | Vintage MOPAR chat | 2 | 12-14-2002 02:07 PM |
How many people are sick of 2002 poll? poll | Ramtacular | Ram Truck Chat | 13 | 10-01-2001 08:16 PM |
W-5 Heads and Intake | sleepyhead | Performance Talk | 1 | 08-12-2001 11:11 PM |