|
#1
|
|||
|
|||
super stock springs?
Hi there everyone, I am looking into purchasing super stock springs for my 73 barracuda 340 auro. The mopar catalogue has two springs for weights of 3300 lbs or 3600 lbs, which one will my car be? I am using xhd springs right now so will these superstocks raise or lower my car ? thanks Tim
|
#2
|
|||
|
|||
The 3600's are for big blocks, the 3300's are for small blocks. Yes these springs will raise the rear of the car. If you buy the springs, dont forget you also need the longer front hangers. These hangers have two holes for the front spring eye. The upper one is the one you probably want. This will make the car sit like a T/A or AAR car. The lower hole just makes the car look goofy. The ass sits WAY too high in the air. The upper hole will raise the rear about two inches above the standard heavy duty spring. The lower hole is about four inches higher than the heavy-duty spring. I measured this at the wheel opening. Hope it helps...
|
#3
|
||||
|
||||
Don't bother with them. I'd try a more modern suspension set up.
Later, Greg |
#4
|
||||
|
||||
Hey Greg
Watched your video this morning...hahahahheeehahahahheee Love it! I can see why you were giggling so hard |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Leaf Springs, Super Stock or Stock | Leige | Performance Talk | 11 | 05-01-2007 04:41 PM |
super stock springs | toad490 | Drag Racing Forum | 10 | 07-04-2004 10:48 AM |
Super Stock Springs | 69_GTX | Vintage MOPAR chat | 15 | 07-05-2003 01:39 AM |
Super Stock Springs | mopargator | Performance Talk | 20 | 02-11-2001 01:43 AM |
Super Stock Springs????? | IceMans68RdRunner | Performance Talk | 4 | 04-19-2000 04:28 AM |