Your 340 combos

[Dartcustom]

Can anybody share their 340 engine combinations? Cam, heads, intake etc. what kind of car is it in and any 1/4 times, things you would do differently? Thanks

[wedgehead]

We have 2 combos. One is a 72 340 block,steel crank stroked to 3.42 stroke,stock 340 rods(shotpeened & polished),Venolia 11 to 1 pistons,340 X heads(Max ported & polished)2.08 int. 1.60 exh. valves,Holley Strip Dominator,1050 Dominator,Cam Motion roller camshaft and Crane 1.5 roller rockers. 1/8 mi 7.12 et NOS 6.64 et. This is a NOS motor.

Combo 2:R1 race block,MP 3.79 stroke crank,Eagle rods,Ross 13 to 1 pistons,2.08 int 1.65 exh valves,Edelbrock Victor W2 intake,1050 Dominator,Cam Motion roller and Harland Sharp rockers 1.6 int 1.5 exh. 1/8 mi 6.59 et 1/4 mi 10.49 et. Still tuning this one. There's more!! 3100 lb car. Wedgehead

[1972roadrunner]

mines at http://tmezz.mezzweb.com:81 its pretty fast, not as fast as wedgeheads but it is quick. i don't have any timeslips but i need to do sumthin about my seat, its about to come up out of the floor...(swapped from split bench to buckets out of an old scout...)

[Dartcustom]

No response from server error when I try to access your page...

[Dartcustom]

btt

[1972roadrunner]

?? works for me...let me try this link: http://www.mezzweb.com:81/tmezz

my brother might be having problems w/the server because COX communcations blocked port 80 (which is where the server was working out of) so now he is using 81 (which is why :81 is in there) if its not working, i'll ask him and maybe he can fix it...

[hammr22]

I believe the block is a '72 340. I bought the (68 -71) rebuild kit from P.A.W. However I made several upgrades and changes.
The block is .30 over with a set of Keith Black pistons, chrome moly rings, Edelbrock Performer RPM camshaft and lifters, chrome moly pushrods, Adjustable rocker arms, double-roller timing chain.
I plan on soon to put an Edelbrock Performer RPM intake manifold, with a Holley 750. Thats all I can think of right now.