any one from ohio w/ a small block short block for sale i need help

[dusta340]

i am lookin for a mopar small block short block 340 or 360 i have a 68 340 but it is 60 over i dont have the $ to have it sleeved and it has a spun rod bearin and 2 bad pistons it ran sweet till i spun that bearing id sell that real cheep like no more than 200 bucks any one from ohio i need help

[AAR4fun]

Sounds like your 340 was ready for retirement. 060 over on a block that should be max 030. Bet it ran a little warm huh?

I would suggest to start hitting the bone yards for a 360 1975 or older. I picked up a 72 S shortblock last year for $100. They're out there.

Best of luck.

[dusta340]

actuly it ran at 160-180 w/ a 160 termostate and i pulled 13.90s w/ a 7.25 rear and 2.76 gears it ran good till i spun a bearing i got the j heads from it that are real nice and still fresh

[concord997]

I know you want something near you, but if you have anybody near san francisco, cal. Going your way, I have a short very rebuildable, block, I was going to use the crank for a stroker etc etc etc.... no heads.... oh yea....also a flywheel, with the bolts, for a 4 spd. All4 $ 200. Don

[dusta340]

cant go that far but sound good thanx any way

[1972roadrunner]

you could "meet in the middle".... good country song

maybe you could both drive half way and meet... have a couple of beers or sumthin and exchange block for money....

if i needed a block for my MoPaR....i would do it... but then again i'm 16 and driving to C-Mart excites me

[5th_Ave_Sleeper]

Keep workin on thatpost count 1972 roadrunner!

[1972roadrunner]

HOW DARE YOU ACCUSE ME OF SUMTHIN THAT LOW!!


hehehe, your doin the same thing... why don't you get on MSN smart alleck? we'll duke it out there...

[dusta340]

thanks but im only 17 and i cant spend 100 bucks on gas and 100 in food and bed just to buy a 200 dollar block ill buy a 500 dollar one around here thats better im still lookin tho

[lmopar69]

I will be coming to Columbus on the 8th or 9th of Aug (as will a million other mopar nuts). If you still dont have one, let me know and I can hook you up. Just let me know what you can spend on it. I can get you a complete motor thats never been rebuilt.

[dusta340]

i fuqured out what i gonna do im gonna use my rods and crank from my 340 and every thing else and buy a block i need a 340 block i do not car what year it is as long as it is no more than 30 over ill buy it i do not want to spend no more than 300 bucks becuse i now complete moters are goin for 650 and up all i need is the block and caps any help and if u can give me a phone nuber or a email i can apreaite it thanks


p.s mopar till i die hows that for a tatoo on my forehead lol