|
#1
|
|||
|
|||
Gearing suggestions
I ran then car at a short track (500 feet) with 3.91's and it was an absolute dog. my best 60 foot was 2.165 seconds. I have a 380/360 Magnum Crate motor with TTI headers 1.6 Roller rockers, Quick adv springs etc. The trans is a 727 with a stage 2 shift kit and a 3000 stall. I have SS springs with a pinion snubber set about an inch from the floor. I was running Hoosier Quick time 's DOT. 26*9.5*14 @ 12 lbs. I think the air pressure is too low but when i got to the track I had one tire at 15 and the other at 12. Any thoughts?. Thanks Todd.
|
#2
|
|||
|
|||
What's the problem, no power or no traction?
If it's no power, it may be a fuel delivery problem. |
#3
|
||||
|
||||
have you thought about trying 4.10's or 4.30's? do you have sure grip in your rear? doesn't appear like it in the photo...
just sumthin to chew on good luck! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
new gearing? | atvr | Ram Truck Chat | 1 | 10-29-2003 09:38 PM |
Gearing | herbert | Ram Truck Chat | 1 | 01-24-2002 10:32 AM |
Gearing | Guido14 | Ram Truck Chat | 3 | 01-02-2002 12:41 AM |
Gearing ? | HeadRam | Ram Truck Chat | 2 | 06-30-2001 06:33 PM |
Gearing up | RAM MAN | Ram Truck Chat | 11 | 02-26-2000 06:44 PM |