dual hood scoops - Moparchat

todd f · #1 10-24-2002, 08:46 PM

Does any one know what the measurment are for placing dual hood scoops on a 70 Dart?

sbuc72 · #2 10-25-2002, 07:04 PM

not sure if this is what your looking for, but i found a pic i took last year, this may help. Cept i think this is a 67 dart,

Hope it helps

.sbuc72

littlecampbell · #3 10-25-2002, 08:41 PM

Well the scoop measurements might be right but thats no A body!...Looks like a 69 Satelite with 70 Duster or Swinger scoops

sbuc72 · #4 10-25-2002, 08:46 PM

Ghaha, I'm retarted.. I never actually looked at the back (the pic is much larger then my screen) and i never even noticed the grill/lights. heh
Sorry for the wrong pic post

.sbuc72

stick4406 · #5 10-25-2002, 09:10 PM

The underside of your hood (the frame) should have access holes cut in it to accomodate the nuts the held these on.....Remember there are rt. and lt. scoops.Just use a socket and a center punch to locate some of the stud holes and work out from there......good luck, stick

amoparman · #6 10-25-2002, 09:18 PM

where do I get a hood like that for a 73 duster, anybody know?

littlecampbell · #7 10-25-2002, 09:20 PM

Thats okay

...Your probably a Leaf fan so that explains it

...That quite the home page you have

ehostler · #8 10-25-2002, 09:36 PM

Actually, that is a 1969 Dodge Coronet. The Dual Snorkle hood was part of the N96 option on the R/T and the Super Bee. If it is a true N96 hood, it also has the Air Grabber setup under the hood as well as the oval air cleaner.

littlecampbell · #9 10-25-2002, 10:20 PM

My first guess was a Coronet but if you look behind the door handle there is no scoop or indentations that where present on all 69 Coronets....Not on Satelites.....The 440 R/T Coronet thats probably what it is Ed.....Ive only been a Mopar nut for a year now, but just dont see any indentations behind the door, either iether, gorgeous car!

ehostler · #10 10-26-2002, 04:00 AM

It's hard to tell with the lighting and the reflection, but I think that you are correct, the Coronet indentions are not there. The back side windows are also wrong for a Coronet. So, it does appear to be a Plymouth, with a RamCharger hood.

bbeckwith · #11 10-26-2002, 11:02 AM

Todd F,

I will take some photos of my hood scoops on my 72 Duster for you. I currently have the hood off the car while Im working,(rather slowly) on the 340. It will be a few days till I get them posted for you as I dont have a digital camera....still using film. Till then,

Bruce Beckwith

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'67 GTX hood scoops	mranon	Restoring your MoPar (Tricks & techniques)	1	12-06-2007 10:14 PM
Hood Scoops	JDart270	Rear Wheel Drive - Parts Wanted	1	09-12-2004 09:42 AM
A body dual hood scoops	swingin72	Performance Talk	3	05-01-2003 02:20 PM
Duster dual hood scoops??	JeepJimmy	Vintage MOPAR chat	4	02-23-2003 09:35 PM
chrome inserts for dual snorkel hood scoops	moodman	Vintage MOPAR chat	0	10-07-2000 03:23 PM