|
#1
|
||||
|
||||
Internally Balanced 360 Crank?
Hey guy's i have a 91 Dodge Dakota that currently has a 318 in it
and i am going to put a 360 in it but i was going to use my stock OD 318 Torque convertor and 318 ballancer But to do this im going to need a Internally balanced 360 crank does anybody know where i can buy one i really want a Forged crank and i would go wild and make it a stroker but it is a daily driver. And by the way the Stock 91 318 intake will it fit on the 360? I remeber i had a Old Edelbrock 360 intake and i put it on a 74 318 and it worked. I don't wanna go overboard on the motor the main deal i need is the Internally balanced crank! Thanks for any info guys! |
#2
|
||||
|
||||
Just get a B&M flexplate thats balanced for the 360 on it. Then it wont matter if the conveter is nuetral balanced as the 318's case. I run them in a 727 a while back using a 440 conveter. it dont matter where the balance is be it the flexplate or weights on the converter.
Bob
__________________
68 Coronet 69 Super Bee......new 500 cid comin soon! 73 Duster witha missing 440/727 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Internally or externally balanced? | hemirambob | Performance Talk | 14 | 01-29-2006 05:52 PM |
How were cast-crank big-blocks usually balanced? | riquiscott | Performance Talk | 7 | 02-17-2004 03:52 PM |
Internally or externally balanced thats the question! | coolcarz | Performance Talk | 8 | 09-03-2002 10:42 AM |
77 440 internally or externally balanced? | red 69 | Performance Talk | 8 | 07-09-2002 11:39 AM |
Is my engine internally balanced? | 68Valiant | Performance Talk | 1 | 02-05-2001 04:11 AM |