Help! Throttle Cable/accelerator Return Springs

[mopar155]

i am desperately looking for part numbers 3870659 and 3870660-these are accelerator return springs and i cant seem to find them ANYWHERE also i was hoping someone could help me with a throttle cable. i have a 1971 dodge challenger that i am swapping a 318 2 bbl for a 360 crate motor with a 4bbl carburetor and am in need of finding a throttle cable-mp only list throttle cables for the six pack and the hemi-any suggestions-thanks in advance for any help

[23T]

For the cable try Lokar they might have the rest of your needs and also check manciniracing.com or summitracing.com.
Hope these help

[kekoakeakane]

First thing you need to do is measure your cable and figure out how much longer you need it. Then read this article on Throttle Cables that AndyF wrote and figure out which one you need. Then call your local Dealer and order one up. As far as the springs, your local dealer may have those in stock too.

BTW, I'm not entirely certain that you'll need a different cable. The 318 and 360 are fairly identical in length and the 4 BBL will at most move the linkage towards the firewall if any. If you change intakes, then things start to change a little.

[AndyF]

I sell repro throttle return springs and so does Hoffmans Winners Circle as well as YO and others. Not that hard of a thing to find. You can also find NOS ones from the usual NOS dealers.

[dirty dan]

Originally posted by mopar155
i am desperately looking for part numbers 3870659 and 3870660-these are accelerator return springs and i cant seem to find them ANYWHERE also i was hoping someone could help me with a throttle cable. i have a 1971 dodge challenger that i am swapping a 318 2 bbl for a 360 crate motor with a 4bbl carburetor and am in need of finding a throttle cable-mp only list throttle cables for the six pack and the hemi-any suggestions-thanks in advance for any help

Mopar 155
Here are some mopar#`s for you to select from.

part#`s Length Aplication

P4529 112 19.75" street hemi
2899 339 20.5" small block a body
2951 495 21" c body big block
4088 095 24" pickup big block
2899 335 24.38" Abody slant 6

It was around 71 when mopar changed from the round steel,to the square plastic peice that goes through the fire wall.
(be sure to order the right one)
Also remember you could use a longer one if you had to.
But they don`t streach for no man.