|
#1
|
||||
|
||||
Hey Roger
Yell at one of the Guy's on the other side of the shop and ask them what the installed hiegth of the springs are on a set of SB Mopar heads and what the Open and Closed pressures are
Thanks |
#2
|
||||
|
||||
cuda.....
Don't you have a catalog? hehe There is a technical section in the back that lists that data for all of the heads. Its general information, so I will break it down a little more too. Spring installed height = 1.800 Coil Bind = 1.130 Pressure @ installed height = 120 lbs Pressure @ 1.210 = 320 lbs Spring Rate = 339 lb/in Pressure @ coil bind = 347 lbs btw....you have mail too..... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Roger H, Riddle me this??? | diego-ted | Performance Talk | 3 | 04-09-2005 08:02 AM |
Another ? for roger | Stus300 | Performance Talk | 6 | 12-05-2004 10:30 PM |
Hey Roger H | Kevin Garceau | Performance Talk | 0 | 09-17-2003 03:29 PM |
Attn Roger - Edelbrock | 345Dart | Performance Talk | 19 | 08-25-2003 11:35 AM |
Roger H I have an edelbrock ? | moparman318 | Performance Talk | 2 | 01-15-2003 01:58 PM |