|
#1
|
||||
|
||||
Scavenger hunt
Hey Guy's got a pretty little single Mother here with a pretty decent 318/70 Challenger that needs some help.
Seems she's cracked her manifolds, nothing worse than big crack in your manifolds... Anyhow check in the scrap iron bins out behind your garages and see if you've got any you could donate, it's a 318 with center dumps...I'll pay the frieght and install them for her if anyone can come up a set. Thanks Guy's She's trying to join us but she's having problems getting her password or something? Anyhow her handle is "cudababe38D", she's the one with the clevage...ah ah ah I mean crack....I mean broken manifolds...geeze I'm gettin' myself in trouble here.... |
#2
|
||||
|
||||
I have at least one!
I have one for the RH side cast # 3830884 - definately a center dump.
Then the LH cast # 3830905 - It dumps between the middle and last ports. it also kinda goes "up" before it turns and goes back down to the pipe flange. I would send a pic but the digi-cam is at a friends house. 5th |
#3
|
||||
|
||||
If they would fit, I'd be willing to donate uncracked 360 heads. I'm not sure they will fit though. Good luck working yourself in their, don
-Deacon |
#4
|
||||
|
||||
Don,
Don't have any s/b parts but if all else fails check out POR 15 Manifold Resto Kit, the stuff works real well. I get my POR 15 supplies from Rags 2 Riches 1-800231-2587 Bryceville, Fla. |
#5
|
||||
|
||||
Thanks for looking guys...5th had the right ones but I found a set on another board 1 mile from my house for free!
Thanks Don |
#6
|
|||
|
|||
Shoulda called me, Don - I've got some too. Let me know if you need any other stock small block parts for her. Her specifications are quite intriguing.
Is she: A) hooked up with anyone, and B) good looking? |
#7
|
||||
|
||||
Let me start humming a couple of tunes of Love boat before you guys start making a match over moparchat. What a great story for the grandkids though....
-Deacon |
#8
|
||||
|
||||
darn
I was hopin to use that space for somthing more usfull, like beer
Oh well, there here if anyone needs them. free to anyone on the board. except for shipping 5th |
#9
|
||||
|
||||
Mopar,Mospeed,Moracing,Molove, Moparchat.com
|
#10
|
||||
|
||||
Hey 5th, what else is on this free shopping list of yours? Where are you located? I'd possibly be willing to venture into this a little bit more if the fee wasn't much. Please, can I get a nice little list
-Deacon |
#11
|
||||
|
||||
the "list"
just off the top of my head
~the previously mentioned manifolds ~Alluminum case A 833 3sp w/OD + /6 bell ~1977 225 /6 cyl head ~1986 318 roller cam, 302 heads tore apart-needs freshend up ~small block truck headers ~F,M or J body driveshaft (904 trans length) ~1986 A904 lockup trans (needs one little part) ~Cast iron small block bellhousing. I am not sure what trans will bolt to it. but I know any A833 WILL NOT. ~full set of 225 /6 rods/pistons (stock bore) ~1987 Buick Grand National 3.8L V6 w/4bbl intake(tore apart-needs built) ~AMC torqueflite trans. bell pattern diff than mopar but all the guts are the same. ~various electric crap, fans, starters, alts, sb water pump. ~Oh yeah and a 77 318/904 Cordoba for parts. Actually its a good car for a resto project, runs really rough and has no reverse. Was thinking of putting the roller 318 and lockup 904 in it. I will go through my pile-o-Mopar this weekend and make a more accurate list. Oh and I live in Jefferson City, TN 30 miles east of Knoxville I would have to ask a little for the big parts, but I will always take care of my Mopar brothers and sisters 5th |
#12
|
||||
|
||||
5th:
im bored, i have a truck, and you have parts you need to get rid of to make room for beer. this could e the start of a beautiful realationship..... the tranny sounds nice. a twelve pack sound about right? also, the ordoba: does it have the twelve inh rotors on the front? if it does, theyd be worth at least a fifth of jack...... mike |
#13
|
||||
|
||||
Dusterbd, How far is Boone from say Ashville? I am an hour from Ashville.
Now about thae trans. Which one? Might need two twelve packs for a trans I do like beer. Let me know about anything else you might want, Hell if you come here, I could load you down! We might be talking cases then I am still kinda sitting on the fence about the doba, I might make a driver out of it. I hate my 83 toyota tercel. 5th |
#14
|
||||
|
||||
well, if you turn the doba into your daily, at least youll have a couple of fun, drunken hours with the toyota....
im about an hourt and a half nort of ashville. my girlfriend knows where your town is, and she can load parts kinda nice, so id probably bring her. (that, and she can hold MY beer while i drive!!!!)(ahd, no, i dont drink and drive its stuipid and dangerous.). but yeah, we can work out something. if that sounds good to you. oh, and i was talking about the od unit. the 4 gear. cause with 2.76 gears and a 6,000 rpm top end, itd be sick in forth...... mike |
#15
|
||||
|
||||
dusterbd!
Come on over! I'll load you up!any weekend would be good for me. I work 3rd shift and sleep through the day. up around 3-4. weekends off, so i screw up my schedule regularly.
Email me at tnjpriest@hotmail.com and we will set somthing up. Do you go to the Bristol Mopar show? I havent had a chance to make it yet, but I always make it to the Nationals in Columbus. 5th |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
need to hunt | treehrt | Hunting & Fishing | 0 | 01-23-2011 03:37 PM |
Elk Hunt | Mopar_Witch | Joke Forum | 0 | 10-23-2006 03:34 PM |
Scavenger Help 85 New York --> 65 Cuda | stupidasso | Rear Wheel Drive - Parts for Sale | 0 | 12-20-2002 08:42 PM |
New way to hunt deer!!! | DavidRo | Ram Truck Chat | 11 | 10-07-2002 10:45 PM |
Dirty Dan is on the hunt | dirty dan | Performance Talk | 2 | 07-24-2002 05:14 PM |