318-360 magnum heads

[gforse]

Are 318 and 360 magnum heads the same, as in valve and port size and flow?

[CLAY TAYLOR]

318-360 Heads

The 318 and 360 magum heads are the same from 92-96. If you will check the mopar dealers parts book you will fine that it gives the same parts # for the 318 and 360 magum engine. I had a set of 318 magum heads that were cracked between the valves, I installed a set 360 magum heads in there place. I found out later that the crack between the valves didn't make any differenc as long as the crack is not into the water jacket. I have two 360 magum heads on my engine that are cracked between the valves on the out side cylinders on each head. I can not tell that thy are cracked by the way it runs.

CLAY