Wanted Challenger Race Parts

[1972cuda340]

I am building a 1973 Challenger Oval Track Black Top Race car. Don't worry it was plain jane and otherwise pretty useless, all ready butchered. What I am after is mainly torsion bars and racing shocks, front and rear. There has to be someone out there who does or used to race 'em and has leftovers or getting rid of all together. On shocks looking probably for a pair of 5 valving for the rear, and a pair of 8 valving for the front, and possibly a single split 5/3 for the rear, and a single split 3/7 for the front to allow for adjustability. As far as torsion bars I believe I need 1.04, or maybe a 1.09 in front and specifically in the right side. Was going to use stock type rear springs but if someone has a set cheap let me know I could be presuaded to change my mind.

Was going to run 3.55 in second gear but would consider buying 5.13 or 5.38 gearset, or center with spool or parts for it.

Any other thoughts or suggestions? Let me know I am learning as I go, previous experience was in absolutely stock cars.