Hey guys i have posted a few questions before about using 318 heads on 360's i had a set of mid 70's 360 heads and was going to use them but the valve guides are excessively worn and i have a 90 318 i decided to take a look at the heads. They have a 715 casting number and are shrouded heads. The intake runners look like they have a much smoother transition than the old 360 head with the hump in the middle of the runner. What do you guys think about bolting these on a 360? the 360 is bored .30 and is going into my 91 Dakota that currently has a 318. Im going to run the Stock TBI fuel injection and run a stock 78 360 4bbl cam and flat top pistons. i just want a little more input on these heads versus the old mid 70's 360 heads. Thanks alot guys for any answers!