|
#1
|
||||
|
||||
Dyno day
Hi All ;
Finally took my 73 Dart Sport, to the dyno Westech in Mira Loma( the one in Car Craft). I have a .030 over 360 with Magnum heads 1.97/1.625 valve just light bowl clean up, 9.75 compression dual plane intake with MP 268/272 .450/.455 cam, using 625 cfm Demon. I was pleased with the results 294 hp at the rear tires at 5300 rpm. Figuring backwards to the engine 372 at 5300 with 428 ft/p at 3800. Made 350 ft/p from 3300 to 5400 rpm. Gotta love MOPAR Denny P.S. have dyno sheet and graph just got to get scanned. Will post if asked for. |
#2
|
||||
|
||||
Sounds like a nice smooth power band...good job!
|
#3
|
||||
|
||||
294 horsepower to the rear wheels? In a streetable small block?
GOOD JOB!!!!!! Have fun with it! |
#4
|
|||
|
|||
Hey Denny - fantastic! What intake are you using? What about the exhaust system?
And, where in LB are you? I lived in Belmont Heights for about 15 years, most of my family is still there. I've probably seen at least one of your Mopars, got any pics? |
#5
|
||||
|
||||
Hi 72;
I'm using the Mopar performance DP for Magnum heads. The headers are Thorley 351's and 2.5 Flowmaster three chambers through 2.25 tail pipes. I'm near Lakewood Mall north of LBCC, only been in LB since 97, born in raised in South Bay. |
#6
|
||||
|
||||
I'm askin!
I can't believe no body said;
"Post the results!" Scan that baby in and show us what ya got. Also, can you post a pic of the headers before they were installed? |
#7
|
|||
|
|||
Sure! Post dyno sheets and pics.
My son lives not too far from you, near Bellflower and South Street and I went to LBCC. I'm real familiar with that part of town. Nice area. Having a few good Mopars in the neighborhood makes it even nicer! |
#8
|
||||
|
||||
Hi All;
The prices are from Racer Net price sheet( green ), the dealer I use does me better also. Attached file is second sheet from best pull. Denny |
#9
|
||||
|
||||
must be a secret...
fergit to attatch somthing? |
#10
|
||||
|
||||
Grrrrrrrrr it's to big in it's current form
|
#11
|
||||
|
||||
email it to me, and i'll convert it to jpg, and do a little file size mods, then put it on my server so it won't have to be a pesky attatchment... i'll give you instructions on how to post the pic IN the post if you don't know how
tmezzenger@hotmail.com |
#12
|
|||
|
|||
Grrrrr, pontiac guys say that
|
#13
|
|||
|
|||
72roadrunner- don't you have that gas guage fixed yet?????
|
#14
|
||||
|
||||
nope... trying to keep the motor goin first, but i found metal in the pan
|
#15
|
||||
|
||||
Hello All;
Here are the numbers; RPM RW Hp Crk HP Crk Trq 3250 165 210 335 3300 180 225 360 3375 190 238 370 3450 201 253 388 3500 215 267 402 3550 225 280 415 3600 230 288 420 3650 237 298 426 3725 242 304 427 3800 247 310 428 3850 250 312 425 3925 253 317 424 4000 257 322 424 4050 261 327 423 4150 264 330 420 4200 267 335 419 4275 270 340 417 4350 272 342 414 4400 274 344 410 4500 276 347 407 4550 278 350 404 4600 279 351 400 4700 281 355 397 4750 284 358 395 4800 287 361 394 4900 288 364 394 4950 290 365 390 5050 292 368 387 5100 292 369 384 5150 292 370 380 5200 293 370 375 5250 294 371 374 5300 294 371 371 5400 294 372 367 5450 294 372 362 5500 294 372 356 5550 292 368 351 5600 292 370 347 5650 290 368 342 5700 288 367 337 5750 287 365 332 I did a little rounding of RPM and Hp & torque numbers just to make easier to read. Denny |
#16
|
||||
|
||||
|
#17
|
||||
|
||||
hmm... here are the actual numbers, and a chart...
Denny, did you get my emails? looks great to me! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dyno in KS or CO? | michaelb | Performance Talk | 8 | 05-05-2004 11:52 AM |
dyno help | 440dart_72 | Drag Racing Forum | 2 | 09-12-2003 07:10 PM |
dyno max | TurboXT | Front Wheel Drive Chat | 1 | 03-28-2002 01:13 AM |
DFW dyno day.... | TxDieselKid | Diesel & Turbo Diesel Chat | 1 | 12-25-2001 12:15 PM |
Dyno #'s | Supercharged5.9R/T | Dakota Truck Forum | 12 | 01-29-2001 05:27 AM |