|
#1
|
|||
|
|||
8 bolt rims for dodge truck
anybody out there got aset of 8 bolt mag wheels they want to part with,for 16.5 or 16in.
|
#2
|
|||
|
|||
caveman, you may want to check the rim size. I have a 79 truck with 16.5" wheels, and 16" wheels won't fit...they hit the calipers.
|
#3
|
|||
|
|||
caveman, you may want to check the rim size. I have a 79 truck with 16.5" wheels, and 16" wheels won't fit...they hit the calipers.
|
#4
|
|||
|
|||
caveman-
If you ever need wheels, check out "The Wheel Place" in San Jose, CA - area code 408. Sam has just about everything, or he can get it. |
#5
|
|||
|
|||
ya learn something new every day.
it's 73/16.5 wheels |
#6
|
||||
|
||||
I run 15's on my 3/4 ton. Just grind the caliper a little. 16 and16.5's are more limited and the 16.5's, good luck keeping the bead. The bead seat area is slanted not flat like a 15 is and rims are more plentyful and cheaper.
[This message has been edited by cageman (edited December 21, 1999).] |
#7
|
|||
|
|||
How are you getting 15" wheels on your 8 lug 3/4t ? As far as I know nobody makes them,are you sure you dont have a heavy half ton w/5 lugs? I had a dodge van that was rated as 3/4t on the door jamb and the title but was a 5 lug.Let me know if I'm in the dark will you?.....PRO....
|
#8
|
||||
|
||||
Pro sorry it took so long to respond to this I forgot about it. Anyway I Have a 70 dodge 3/4 ton and I nstalled a dana 44 front out of a 75 chevy 3/4 and I installed the power steering and power brakes from the chevy too. As far as Im concerned Dodge never made a power steering in the old power wagons that was worth its weight in scrap. I love the rest of the truck though. Now, I have 8 bolt 15 inch white spokes on this ride. You can get 15s from I think summit under the super trucker line. 4wheel parts whsl has them too. All my fellow 4xers have 15s on there rigs also. I have not seen alum 15 for the 8 lug but I havent looked either I can not run them because I run 5/8 studs and 1 inch coarse threaded lug nuts. Try to find a lugnut to fit that size and thread for alum rims http://www.moparchat.com/ubb/smile.gif
------------------ |
#9
|
|||
|
|||
Working in the wheel and tire bussiness I can tell you this. If there is an 8 lug bolt patern in 15" in alloy wheels I have never seen it. Your best bet is stay with steel, or if you want more selection then go to 16's. One other thing your wheel studs are 9/16 thread pitch as are most early 8 on 6.5 bolt patterns. Old Dodge 3/4 ton had 1/2"x20 thread pitch.
|
#10
|
|||
|
|||
I HAVE A SET OF 8 HOLE 15 INCH WHEELS ON A TRUCK THAT I AM PARTING OUT IF YOU ARE INTERESTED. I ALSO HAVE 2 EXTRA ONES TOO.
|
#11
|
|||
|
|||
Quote:
Thank you |
#12
|
|||
|
|||
Hello do you still have the 15 inch eight lug wheels ?
What is the price for the six ? 812-528-4425 Thank you |
#13
|
||||
|
||||
This thread is 7 years old. I don't think he's around anymore.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Small bolt pattern rims | comoxian | Wheels & Tires Forum... | 10 | 09-13-2007 10:09 PM |
2003 Dodge Ram 1500 Rims (Bolt Pattern) HELP | gamamadog | Wheels & Tires Forum... | 2 | 02-10-2007 03:43 AM |
Need 16in Magnum 5 spoke rims or new 20in dodge ram rims! | scott98 | Wheels & Tires Forum... | 1 | 11-05-2002 03:12 PM |
Small Bolt Pattern (5 Lug) Rims | bryanl | Wheels & Tires Forum... | 3 | 06-12-2002 07:29 PM |
Lightning rims on a Ram? What bolt pattern do we have? | RAM360SST | Ram Truck Chat | 7 | 08-28-2000 11:29 PM |