72 dart/wheels

[sidlmopar]

My friend has a 72 dart he wants to no what can he fit under the rear he is planning on ordering some centerlines he has small hole pattern what was the back spaceing on a 72 dart I wonder if you can order 15x7 or 8's with small hole pattern thank you any one have two small hole rally's

[gthomas]

To check your clearance use three plumbs, one from the spring, inside fender lip and one from the face of the drum. You'll have exact measurements. Check both sides because if you're going to put the biggest tires possible, you want to make sure one side isn't different. And, yes Center Line will drill you rims to custom size. They drilled my 5x4in pattern for my Duster in 15x5.5's and 15x10's. Now for my 2 cents worth of opinion: I would go to 16 inch rims because 15 inch rims really limit tire sizes and in the 255's and up you will most likely be stuck with H rated tires (114mph). When you get into 16 inch tires you'll find all the larger tires are available in V & Z ratings.

------------------
1972 340 Duster
-Dyno @ 420hp/440ftlbstq
-Built 727 w/3000 stall
-3000lbs
1999 2500 4x4
-V10 w/5sp
-Manual xfer case