|
#1
|
||||
|
||||
383 head bolt torque specs?????
383 motor with 906 heads. New heads at the end of last summer and the snow came before I finished. I have it torqued down but I'm about to break it in and I can't find the friggn shop manual....hate when that happens.
What are the torque specs for the heads and rocker arms? Once it runs a bit I want to recheck it..........
__________________
https://t.me/pump_upp |
#2
|
|||
|
|||
i have a 71 383 and i use the 346 heads , but i think the torque values were around the same. i torqued mine to 75 lbs in three steps. 30 1st, then 50 then the final one. as for the rocker shaft i used 30 lbs on those . this was from a 68 shop manual. good luck
|
#3
|
|||
|
|||
The engine book (M-P Engines) shows 70 and 25 for heads and rocker shaft hold downs. Always do the big numbers in increments.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
water pump bolt specs | bugs granpa | Dakota Truck Forum | 2 | 12-28-2009 09:51 AM |
Help - ARP Head Bolt Torque Specs. | dtedler | Performance Talk | 3 | 04-22-2004 08:42 AM |
anybody have bolt circle specs on these? | Jetstar | Wheels & Tires Forum... | 1 | 09-19-2003 05:26 PM |
Leaf spring U-Bolt tightening specs and ideas | 6 packin | Performance Talk | 7 | 04-11-2003 04:02 AM |
Where can I find factory bolt torque specs? | BrandonW | Ram Truck Chat | 3 | 01-06-2001 11:16 PM |