|
#1
|
||||
|
||||
new style pilot bearing
Which end of the new style pilot bearing goes in the crank? I have one of the new type bearings for magnum motors that I want to put in my 340's crank and I have no clue which end should go into the crank and which should be facing outwards. There is one side with a chamfered edge and the other looks like it had about a 1/16" milled off the outer edge. Thanks in advance.
|
#2
|
||||
|
||||
I believe that the chamfered edge goes in first to help it center in the hole. I could be wrong though.
|
#3
|
|||
|
|||
chamfered edge goes in first, good question!!! Thinking thru assembly never hurts!
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pilot bearing joke of the day | 70Barracuda | Performance Talk | 3 | 05-19-2005 11:23 PM |
pilot bearing | robike | Ram Truck Chat | 5 | 11-12-2004 02:33 PM |
Pilot bearing questions | FearThe4Doors | Performance Talk | 14 | 06-29-2003 02:38 PM |
pilot bearing lube? | bbeckwith | Performance Talk | 18 | 06-02-2003 06:09 PM |
Pilot bearing | Hugh | Performance Talk | 0 | 09-24-2000 05:12 AM |