|
#1
|
|||
|
|||
Rallye Cluster Oil Press Gauge
Does anyone have an oil pressure reference comparing the non-descriptive "tick" marks on the oil pressure gauge in an E-body rallye gauge setup to actual oil pressure numbers? The gauge has high and low marks along with a middle range.
|
#2
|
||||
|
||||
The gage in my brothers R/T Challenger reads from 0-100 psi. (we hooked up a extra oil Pressure gage at on time)Then of coarse straight up would be 50 lbs the 25 on the first mark and 75 on the 3. The car should start cold and run near the middle, then when it warms a little drop of a little to maybe 1/3 of gage. I wouldnt worry to much unless it drops below the first mark. His factory 440 holds around 55-60 psi when hot and around 40-45 warm operating temp.
__________________
68 Coronet 69 Super Bee......new 500 cid comin soon! 73 Duster witha missing 440/727 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gauge cluster swap to rally cluster | 74sunburst | Restoring your MoPar (Tricks & techniques) | 6 | 09-02-2009 05:55 PM |
70 B Body Rallye Gauge Cluster Restoration | mopargator | Vintage MOPAR chat | 2 | 12-16-2000 06:01 PM |
70 B Body Rallye Gauge Cluster Restoration | mopargator | Restoring your MoPar (Tricks & techniques) | 0 | 12-12-2000 07:43 AM |
70 B Body Rallye Gauge Cluster Restoration | mopargator | MOPAR NASCAR! | 0 | 12-12-2000 05:16 AM |
Mechanical Oil Press gauge bad?-or just bad bearings!!!? | Dart_340_Swinger | Performance Talk | 17 | 08-09-2000 01:28 AM |