|
#1
|
|||
|
|||
70 challenger weight?
I'm building a new car for next year. A 70 challenger with a nos 500 big block.the car has fiberglass hood,decklid,bumpers,valance panels.
The motor is a truck block 70440. And I have a 4.15 crank and the heads are stage 6 with some port work by muscle motors. Here is the question? What do you think it will weigh with a 10 point cage, and that do you think it will run? |
#2
|
|||
|
|||
You running it at Bandimere?
I have 3 Challengers... * The weight of my 72 (440) w/ 10 point cage... Fiberglass good and decklid and seats taken out... is 3300 LBS w/out me. Runs low 12's at Bandimere with unported heads and 12:1 compression.. small solid lift cam.. 4500 Stall Convertor / 5.13 rearend... * My 70 (440 6 Pack Clone) w/fiberglass hood/bumpers but everything else intact is 3550 LBS.....4 Speed w/ 4.56 gears and 9:1 stock 440 w/ Hughes Hyd Cam (.550 lift)... ported 906 heads runs high 12's low 13's.... * My 70 TubeFrame Challenger 512 Cube Stroker Roller Motor B1 Heads... Alcohol Injected... Glide w/ 4.88 9" Ford... (2600 LBS)... I'll let you know this weekend as I'm just finishing up but I hope it run's better than 12's |
#3
|
|||
|
|||
track.
THANKS FOR THE REPLY AND YES. I HOPE TO RUN MORE TRACKS THAN JUST BANDIMERE. THE CAR Won't BE READY, HOPE TO BE OUT NEXT YEAR BY THE MOPAR EVENT AT BANIDIMERE IN JUNE OF 2004. THIS IS ALSO MY STREET CAR. THE CAR WILL HAVE A SOLID CAM .672 LIFT AND A 1050 DOMINATOR CARB. THE MOTOR MADE 781 HP AT 6200 RPMS AND NOW I HAVE A TRANSMISSION TO BUILD AND FINISH THE BODY WORK, THIS WILL HAVE A 300 HP SHOT IN IT AND 4.30 GEARS IN A 9 INCH WITH LADDER BARS AND THE STOCK FLOOR. THE TIRES ARE 29.5/13.5/15 WITH COIL OVERS. ON THE BOTTLE I WOULD LIKE TO SEE 9.30S IN THE 1/4 MILE. WHAT DO YOU THINK?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Weight and Weight Distribution of a B-Body | bronco9588 | Vintage MOPAR chat | 0 | 01-05-2012 08:27 PM |
Stock Challenger Weight? | NZ 440R/T | Vintage MOPAR chat | 24 | 12-20-2003 11:29 PM |
bob weight | dirty dan | Performance Talk | 4 | 08-17-2002 09:04 PM |
Help needed...weight of a 70 Challenger with a slant six | dowling | Slant Six Chat | 0 | 06-18-2002 01:13 PM |
what oil weight for 440? | Cuda4play | Performance Talk | 8 | 05-16-2001 01:42 AM |