|
#1
|
|||
|
|||
71 340 camshaft thrust plate oil bolt placement
ok 1971 340...... on the camshaft thrust plate, it has 4 bolts, 1 bolt is brass and has a hole in it so oil may get to the timing chain and stuff under the timing cover, I think it goes in the upper right side, this is where it was when i disassembled the motor, the upper right has the hole going all the way though to the lifter valley... Is this the correct place ???? ..... once again thanks very much for all the replies....
|
#2
|
||||
|
||||
It should be positioned over the tab that gets bolted on the plate.
The tab drips oil onto the chain. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cam thrust plate ques. | Twisted360 | Performance Talk | 7 | 06-23-2004 12:09 AM |
cam thrust plate bolts | bbeckwith | Performance Talk | 6 | 12-31-2003 11:51 AM |
NOS plate placement | wedgehead | Drag Racing Forum | 2 | 03-27-2002 04:24 PM |
Camshaft retainer plate oiler bolt | Hester | Dakota Truck Forum | 0 | 02-05-2002 12:56 PM |
SB Cam Thrust Plate | moparmac | Performance Talk | 1 | 01-29-2002 05:41 PM |