|
#1
|
||||
|
||||
Ignition up grade (mopar)
I have a customer that has a mopar performance ignition box
part # P4120505 and conversion wiring harness # P3690152. The original box only has a three pin conector and the new one has a 4 or 5 pin one. The problem is there are no wiring instructions!! Any help to fine a wiring diagram would be great. This car is a 1979 New Port Thanks |
#2
|
||||
|
||||
A search would yeild results. I do not have the directions on the computer.
3 pin? are ya sure. That does not sound right. |
#3
|
||||
|
||||
The current conversion kit is a 4-pin kit. The original in that car would have been a 4-pin or a 5-pin. 2 pins go to the distributor, 1 pin goes to the coil, 1 pin is keyed hot and if used, the last pin is for lean burn.
|
#4
|
|||
|
|||
The wiring diagram can be found in the Mopar engine books the chassis manual, the books at the parts store and the library. Ed also posted the diagram on this site a search is needed.
|
#6
|
||||
|
||||
Your a good man E.
|
#7
|
||||
|
||||
Thanks guys
this is a great help Awsome!! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
garage up grade | treehrt | Home Improvement | 1 | 03-09-2011 12:56 PM |
Power Up-grade | daryl03hemi | PT Cruiser Chat | 0 | 08-16-2003 09:38 AM |
mopar ignition | jleilich | Performance Talk | 4 | 11-12-2002 01:39 AM |
6th Grade Answers | SUN RA KAT | Joke Forum | 0 | 08-22-2002 12:33 PM |
Carburator up grade | riverside | Performance Talk | 10 | 02-11-2002 07:44 AM |