|
|
|
|||||||
|
#1
07-24-2003, 09:53 PM
|
||||
|
||||
flywheel bolt washers?
My flywheel bolts came today. In the package are a set of star type crush washers are theses needed? I'm doing a 4spd conversion on a 66 dart.
|
|
#2
07-25-2003, 09:35 PM
|
|||
|
|||
I would use them, and also put blue locktite on the threads.
|
|
#3
07-25-2003, 10:35 PM
|
||||
|
||||
|
Have you used them before? I've posted this on three different boards and half of the responses say to use them and half say don't.
|
|
#4
07-26-2003, 08:45 AM
|
|||
|
|||
|
I am an ASE master auto tech. Some cars use them and some do not. Over the years I have seen, many flywheel/flexplate bolts come loose. That is why a number of people, myself included, suggested locktite. If I have the washers I use them, they will not hurt anything, and give added insurance. If you are concerned, look in the factory parts manual, it will have a picture, and show if the washers were used or not.
|
|
#5
07-26-2003, 09:02 AM
|
||||
|
||||
 Thanks for your help. I have used loctite in the past. But I've never seen the washers before. This is my first slant 6 / Mopar flywheel and just want to be sure.
|
|
#6
07-26-2003, 10:34 AM
|
||||
|
||||
|
Well the flywheel is in bolts washers and loctite.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Flat Washers ??? | Jack_440 Savoy | Performance Talk | 9 | 08-15-2007 07:58 PM |
| Spark Plug Washers | DonP | Performance Talk | 13 | 10-08-2003 04:20 PM |
| upper ball joint washers??? | coolcarz | Performance Talk | 2 | 08-28-2002 03:14 PM |
| 360 main cap bolts--use washers?? | PaulS | Performance Talk | 4 | 06-14-2002 10:29 AM |
| Need Thrust Washers! | Bad@ssV10 | Ram Truck Chat | 2 | 11-21-2000 08:07 AM |
Linear Mode
