|
#1
|
|||
|
|||
alternator wiring
i need some help with my alternator wiring. i tried to post a picture that i drew but it wouldnt let me. i will try ity like this.
BATTERY POSITVE TERMINAL-----------------------ALTERNATOR TERMINAL WITH NUT/FROM ALT FEILD TERMINAL-------------VOLTAGE REGULATOR FLD TERM/OTHER TERMINAL ON REGULATOR---------------VOLTMETER------------IGNITION SWITCH HOT iS THIS CORRECT? the alternator only has two wires.----- reps wires. |
#2
|
||||
|
||||
You say the alt as two wires. I am guessing that you mean one battery connector and one field connector.
If that is correct then this is the basic wiring... + on battery to starter relay. from starter relay to amp/alt gauge. from amp/alt gauge to batt term on alt. field from alt to field side of regulator. IGN side of regulator goes two different directions. One is to the ballast resistor. The other goes to IGN 1 of the ignition switch. |
#3
|
|||
|
|||
ok i see now. mine is a little different because i am using a fuse block with terminals for the regulator and the ballast resistor. thanks for the help.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Alternator wiring | chirorod | Performance Talk | 4 | 05-18-2013 06:22 AM |
Alternator Wiring | dtack64 | Performance Talk | 3 | 04-12-2004 11:51 PM |
Alternator wiring | Blygy | Performance Talk | 4 | 07-30-2003 10:59 AM |
Alternator wiring | bwlizard | Performance Talk | 23 | 07-13-2002 11:50 PM |
Alternator Wiring | bwlizard | Performance Talk | 1 | 07-22-2001 12:43 AM |