Front spring hanger ?

[Aspen77RT]

Since moparts isnt answering this. I'll give you all a try.


My SS springs arrived. On the front F-body hanger(for the SS springs), which hole should I start out with? I was going to put the spring in the bottom hole. The rear shackle hangers are stock, but I have longer ones, if that matters.

[darren509]

The holes are for controling your launch. If you dont have a traction problem then use the upper holes on both brackets, for traction problems use the lowers. Dont be upset if your ride sits a little higher on one side, usually the pass. side.That is what theyre supposed to do; compensate for the axle twist.. As as using longer shackles, only if you want to have it sit up higher for bigger tires. Mine sat pretty high on their own so you might want to check it first.

[Aspen77RT]

Thanks for your reply,

Ill try the upper hole. The Aspen is a 4-speed. I already know about the gangsta lean with the SS springs. I'll take your advice and just use the stock rear hangers.