|
#1
|
|||
|
|||
Oiling Breather?
Hi, I have a crankcase breather with instructions that say it needs to be oiled? What type of oil is used for this and how is it done? Do you just give it a bath in oil or what? Thanks in advance for your help.
|
#2
|
|||
|
|||
Forgot something, I was also wondering what you guys think about aluminum fuel lines on a street car. Thanks again!!
|
#3
|
||||
|
||||
use a lightweight oil such as the K&N filter oil and follow the instructions on the bottle. I dont think you soak it, just lightly coat it. As for AL fuel lines, they are fine for sturdy runs, but from the frame rail to the motor mounted pump, I would go steel braided or rubber in the worst case because AL gets brittle and wherever there is torsional forces will result in cracks over time.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Breather Cap | Lincoln41 | Performance Talk | 4 | 04-19-2007 10:27 AM |
oil cap breather | oibrownskin | Slant Six Chat | 0 | 03-20-2004 10:50 PM |
Is a breather NECESSARY??? | Mjchael | Slant Six Chat | 12 | 04-10-2002 01:05 AM |
breather | JOSHT | Ram Truck Chat | 6 | 09-18-2001 07:53 AM |
air breather | sidlmopar | Performance Talk | 3 | 05-09-2000 06:18 AM |