7.100 rods

[bishop]

Does any know who makes/sells 7.100 rod with 2.200 big end and a .990 wrist pin dia.

[jelsr]

Part #10109 by Eagle from Hughes and I am sure others.

[cuda66273]

I can check with Oliver if your looking for a good Billet piece...and with that size of an arm you better be looking at some good American product....

Email me direct if your interested I can't quote prices on Oliver here....my pricing is too low and it ticks off all the other WD's

[Windsor377]

Originally posted by cuda66273
I can check with Oliver if your looking for a good Billet piece...and with that size of an arm you better be looking at some good American product....

Email me direct if your interested I can't quote prices on Oliver here....my pricing is too low and it ticks off all the other WD's

Ditto and stay with an I beam or the Oliver style I beam. (if using steel, otherwise go GRP). Stay away from a light weight H beam....Been there, done that with a 600 inch T/S car....not pretty...especially after yiu hit the nitrous button!