|
|
|
|||||||
|
#1
12-01-2003, 07:35 PM
|
||||
|
||||
starter help
I bought a lakewood bellhousing on line and when I when to bolt up my new gear reduction nippo. starter, the starter gear was 1/2 inch out from the ring gear.
Even in the inner bolt holes, the starter was too far out from the ring gear. The starter will hit the block when trying to set the teeth to mesh properly. A friend was telling me that he thought the hemi bellhousings were different and took a different starter with the bellhousing. Can anybody help me on this or have any ideas?  
|
|
#3
12-01-2003, 11:35 PM
|
||||
|
||||
Are the hemi's the only one's to get the 11 inch clutches?
Are they different then the 10 1/2 inch scallope clutch flywheels? Is there anything I can do to get this bellhousing to work with this flywheel short of buying a new 11 inch flywheel?
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| starter? | A74speedy | Dakota Truck Forum | 8 | 05-23-2008 05:19 PM |
| starter | dirt track | Circle Track Chat | 15 | 06-14-2007 08:14 PM |
| mopar mini starter same as late model v8 starter? | bratpack | Performance Talk | 2 | 07-21-2006 08:38 AM |
| Starter Grinding on small block with lightweight starter | bratpack | Performance Talk | 1 | 07-17-2006 10:14 PM |
| starter | pro2000tb | Front Wheel Drive Chat | 5 | 11-05-2002 03:59 AM |
Linear Mode
