Mopar M1 intake manifold

[whiskeydaniels]

I have a 99 Dakota RT I am in the Marines currently deployed I need to know where I can get a kit to install this into my truck and is it a pain in the asss to install

[GS -]

Mancini racing's website has the install kit for $59.95:

http://store.yahoo.com/chucker54/inman.html


U-RAH!!!!!!

[whiskeydaniels]

hey thanks man I was looking at the kit does it have the gaskets all so how much of a pain the ass to install

[whiskeydaniels]

is there any where else

[GS -]

I installed the 4 bbl version of the M1 on my '98 and if you take your time, its not bad at all if you're a gearhead and like to "do it yourself". I've heard the M1- 2bbl is an even easier install because its an exact replacement. The install kit should come with new gaskets, intake bolts, etc.

My advice would be to read some of the "M1 installs", you can just about find them everywhere.

http://www.dakotart.com/faqarticles/...structions.htm


Just one I found in an M1 install search on the internet.

Good luck!

[undeadslant6]

You can get the kit from anyone that sells mopar performance parts.
The install kit does not come with gaskets. It is just some aluminum spacers for the fuel rails and either the alternator or a/c mount. It also has bolts.
You will need intake manifold gaskets and a throttle body gasket and a thermostat gasket. Its a good time to put in a 180degree thermostat.
You might want new O-rings on the injectors.
It was not hard at all to change.
Good luck with your install.

[whiskeydaniels]

hey thanks for the reply man so I can go to a dealership parts department and get it from them gaskets and install kit everything like that ya I know about the 180 thremo to I had all ready planned on that

[powerwagon]

hey whiskey, i am in the Corps too at Pendleton, i been deployed quite a bit myself, who are ya with, and what do ya do? Im a Cpl, with I MEF Motor T, im a 3531 motor t bubba, and got back from iraq in september. Let me know where you are at, and if you need anything man.

powerwagon, Cpl of Marines

[whiskeydaniels]

I am with 464 at New River I got back from Iraq in May of last year then was deployed to Africa in October I don't need anything man I am getting ready to come home just try to find a kit to install this damn intake manifold when i get home