solid lifter ?

[jsaylor]

I have a 1965 dart 225 did this engine have solid lifters? If so do you know what the adjustment is for ex. and intake?

It runs very rough, I have changed the carb, spark plug wires, spark plugs, timing, coil. I was thinkinf somebody my have done a poor job on adjusting the valves. have any ideas? thanks for you help

[Slant Cecil]

.010int, .020exh

Cecil

[one4debate]

Cecil is correct,

.010 intake and .020 exhaust. When I adjusted mine after reworking the head I set them at .012 and .022, leaving a little play due to the unleaded gas these days. they do however get a little noisy after warming up. I am going to re- adjust them to .010 .020 factory specs and run it like a sane person to avoid burning the new valves

Dave

[jsaylor]

Thanks so much for your help!!! It runs perfect now after adjusting the valves, Somebody set the exhaust at .04