360 in '75 /6 Dart Sport

[matt0481]

Has anyone fabricated their own mounts and kept the /6 k member? I 'm new at this as I just bought the Dart and already had a 60K mile 360 from a '79 Lebaron wagon. I plan to ditch the lean burn and use a 727 from my old '68 D-100. I am looking for a rear differential too. Any suggestions would be great.

Thanks,
Matt

[rumblefish360]

Schumaucher creative services can be found in MoPar mags and on the net. They have motor mounts for this swap. A bolt in deal.
The rear from an "A" body (8-1/4 or 8-3/4) can fit in. Or a donor car for an 8-1/4.

[Chache876]

www.engine-swaps.com is schumacers site

[njdevil2]

Used the Schumacher mount in my ASpen. Measure 3 times cut once, fits great minimum hassle, just make sure you have a 1/2 drill & sharp bits. My 360 replaced th /6 no problem. Even the tranny mount lined up perfect!!

[rumblefish360]

Thanks Chache876. I don't have it anymore.