|
#1
|
||||
|
||||
727 Trans Not Shifting to 3RD
Need some advice on my 727 Transmission........ Under full throttle applications the tranny shifts from first to second just fine and very quickly, in fact it makes the right rear of the car swing out very abruptly, however the tranny will not shift from second to third unless you let off the throttle......... Any theories and or recommendations would be greatly appreciated...........
HerrWolfe |
#2
|
||||
|
||||
That's primarily controlled by the kickdown linkage adjustment, unless there is something wrong internally in the transmission.
There have been many topics on the correct way to adjust this linkage, but it is probably best just to make adjustments and then drive it until it is right. Dartman |
#3
|
|||
|
|||
Same problem here, turn the adjuster clockwise one turn releive the throttle pressure, repeat this procedure until it shifts correctly. I am almost there.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A518 trans not shifting | nhdriver | Dakota Truck Forum | 0 | 04-15-2013 04:08 PM |
new 904 trans not shifting with hurst shifter | 73_RoadRunner | Performance Talk | 5 | 06-10-2007 10:43 PM |
auto trans revs out before shifting into 3rd? | ogopogo | Ram Truck Chat | 15 | 02-17-2003 02:02 PM |
CEL and trans not shifting(auto) | toxic13 | Dakota Truck Forum | 1 | 02-08-2003 03:11 AM |
Funny shifting trans need help | little storker | Ram Truck Chat | 0 | 04-03-2001 11:17 PM |