440 Engine with Sixty Nine 1/2 SixPack
.SOLD
This comes with a freshly rebuilt 440 long block including: new .030 over pistons & pins, new rings, new cam bearings, new cam & lifters, new .010 under main and rod bearings, crankshaft turned and polished .010 under, new hardened valve seats & guides in 906 heads, used Moroso chrome valve covers, comes with new oil pump (not installed), new freeze plugs, new timing set and Mopar Performance chrome cover, new Mopar Performance chrome dipstick and tube (not installed still in the package). The SixPack, setup is an original aluminum 1969 1/2, that came on the 69.5 Plymouth Roadrunner or Dodge Superbee. The carburetors are original as well as is the air cleaner assembly. The carburetors look to be in very good condition but have not been ran since purchasing them and may need rebuilding due to their age. They are installed finger tight on new gaskets. The year of the engine is 1968, the heads are 69, the forged steel crank has the bore for the pilot bushing and could be used on 4 speed manual transmission. This also comes with a used Mopar Performance electronic ignition setup which includes the distributor, the wiring harness and the chrome module. The engine and manifold were painted with 1969 Hemi Orange catalyst type Centari acrylic enamel. This does not include the oil pan, dampner or water pump housing, what you see is what you get other than the electronic ignition setup as explained, the engine stand is not included either. This was built by South Valley Machine in Salt Lake City, UT. This would make a nice addition to your Cuda, Charger, Dart, GTX, Coronet or Challenger. Asking $3400.00. Local pick up preferred but can be shipped if the buyer makes all the arrangements and pays an extra 50.00 for the crate. This would be shipped form 84065 zip code.SOLD
|