|
#1
|
||||
|
||||
tourqe specs
i got a airgap intake just wondering what the tourqe specs are ......
|
#2
|
||||
|
||||
35 ft/lb should be safe. It usually is dictated by the fastener size. 3/8-16 can be up to 50 ft/lb on a B/RB intake.
|
#3
|
|||
|
|||
According to the instruction sheet that came with mine, proper torque is 25 ft. lbs., and you tighten the bolts in a criss-cross pattern starting in the center and working out toward the ends.
|
#4
|
||||
|
||||
B/RB is 40 ft-lbs
A is 35 ft-lbs |
#5
|
||||
|
||||
Torque is not only dictated by fastener size but by the material being torqued. For example, typically aluminum heads are about 10lbs less than iron due to expansion.
|
#6
|
|||
|
|||
Exactly right, hedgehog. Cuda360, DO NOT tighten that manifold to 35. You will risk warping the mounting surface. Trust me, I made a trip out to the garage last night just to get the instruction sheet so I was sure I was giving you the correct information.
|
#7
|
||||
|
||||
thankyou 72Challenger ...
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help Head Tourqe Setting | Cobrakeith | Performance Talk | 1 | 04-12-2006 07:11 PM |
Cam Specs | jamepc | Dakota Truck Forum | 1 | 11-15-2004 09:30 AM |
318 or 360 cam specs | powerwagon | Performance Talk | 5 | 06-26-2004 12:22 AM |
Cam specs | Rob Campbell | Drag Racing Forum | 7 | 04-20-2002 07:13 PM |
Tourqe Specks on Lugs | dubge | Ram Truck Chat | 3 | 07-27-2001 04:59 PM |