|
#1
|
||||
|
||||
3' exaust from Summit
I see Summit is offering 3" exaust systems from FlowMaster. Looks like all parts are there for about $470.00. Does anybody have any input on this setup... I have TTI headers 2.25 primary and 4.5 collectors. TTI wants $570 with DynoMax mufflers. Which do you suppose a person should go with??? The FloMaster setup comes with the series 40 street/strip mufflers. Neither include tips but I have a nice set allready. Both are mandrel bent... Any input????
|
#2
|
||||
|
||||
What kind of vehicle do you have? My brothers 71 340 Duster has tti headers and we recently installed the complete 2.5" exhaust from tti. It fit like a glove with real good ground clearance and h pipe. It has the Dynomax mufflers and it sounds nice. Not annoyingly loud but not whimpy by any means. The flowmasters are noisy inside the car but I guess it all depends on what you do with it. Race? Cruise? Show?
|
#3
|
||||
|
||||
It's a 74 Challenger. Not finished yet but here's what it looks like now
http://www.omniracing.net/manip_DSCF0042.JPG I don't want to have to wear hearing protection when just cruising... like you said, but I do want to let people know there's another Mopar in town. |
#4
|
||||
|
||||
Nice Challenger! I don't have experience with the TTi stuff for e body Hemis but I will be ordering a complete system for my 340 A body in the near future. Fit perfect as I said before. Good luck on your project.
|
#5
|
||||
|
||||
Did I read that right? 4.5 inch collectors? Those are some big'uns! Of course that blower does speak of some CFM.
|
#6
|
||||
|
||||
From what I have read in the past, the flowmaster exhaust system leaves a lot to be desired in the fit department. Where the TTI system fits like it is supposed to.
As far as the mufflers go, I prefer the DynoMax sound over the Flowmaster sound. TTI can set you up with Flowmasters, if that is what you want. |
#7
|
|||
|
|||
I would steer clear of the flowmaster. There mufflers have a real harsh sound especially at cruise speed....If you are making the power that the motor appears it is making you might consider larger than 3"...
|
#8
|
||||
|
||||
Flowmasters
If its too loud your too old.
|
#9
|
||||
|
||||
Who said that they were too loud? They just have a tinny sound that makes your car sound like crap. The DynoMax muffler produce a much better sound and flow about the same.
|
#10
|
|||
|
|||
Exactly as eholster said, flows are old school in my book...The straight through dynomax are the way to go in my book.
|
#11
|
||||
|
||||
I agree the dynomax have a mellow but powerful sound.
|
#12
|
|||
|
|||
Have you considered installing Purple Hornies mufflers? A friend of mine recently installed a set on his 440 Coronet and he claims a very noticeable performance increase. This car truly has a sound of its own since he installed these.
|
#13
|
||||
|
||||
Thanks Guys & Gals???
The TTIs are ordered.... I don't think mufflers will make much difference in performance increase or decrease on this project. I just want a nice sound and a good fit. I knew I was going to order the TTIs probly all along I just needed that little push. I mean what's a hundred bucks when I have probly 22,000-24,000 in the project... and still no paint. Should be nice when it's done.... again thanks for pushing me in this direction.... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
before new exaust, cat question | atvr | Ram Truck Chat | 5 | 08-19-2004 08:02 AM |
exaust gasket | william ona | Parts Wanted | 2 | 10-12-2003 09:24 PM |
Exaust | MIKEY ALBERTIN | Dakota Truck Forum | 9 | 02-22-2001 10:47 AM |
What Exaust Should I go with on a 98 SS/T | 98 SS/T 360 | Ram Truck Chat | 6 | 10-05-2000 11:05 PM |
V-10 Exaust help | Capt Chaos | Ram Truck Chat | 12 | 02-15-2000 12:45 AM |