|
#1
|
||||
|
||||
Ol' AVS question(s)
I have myself an old AVS. The thing with this carb is it has a 3rd idle screw, above the 2 usual. Dead center.
This is the air bleed right? Which way to turn for what effect? |
#2
|
||||
|
||||
Now that is OLD.Off an old 389 poncho?In restricts air flow out enables it I would think. Take it out once and see what happens mabeye?
|
#3
|
||||
|
||||
That "drive" will have to wait some. I am preping it to fool around some. Just experiment with it.
The only thing I'll have anytime soon is a 400 going into the Magnum. I know it's an air bleed, but thats it. I drilled and tapped the carb to fit on a Edel. electric choke. I'll fuss with it more later. I'll have to look at it and see what I can mess with next. |
#4
|
||||
|
||||
650?Square bore?
|
#5
|
||||
|
||||
Yes, the small one. Yes, squarebore. I have a 750 on the side waiting. After I get done with this one, I'll start in on that one. Although it isn't an air bleed model. I like the AVS better. I want to replace the 750 Carter AFB with the OE AVS later some time.
I have messed with the AFB some, not much. Nice carb. I used a K&N stub stack, and there extreme top. I want to get to some modes with the secondary weights and boosters. I was looking for awhile back the AFB or was it the AVS thats a 3bbl. That looks like fun for some high speed driving. I'd like to try to make one out of the small AVS for fun. |
#6
|
||||
|
||||
Bump BTT, still looking for the tip.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question Answer Question | NZ 440R/T | Off-Topic Forum | 117 | 07-09-2005 09:13 AM |
pcm question and tranny fluid question | mattnsue | Ram Truck Chat | 4 | 03-04-2002 11:24 AM |