|
#1
|
|||
|
|||
Torsion Bar Recomendations
I am after some recommendatiosn for Torsion bars for an A body station wagon, which will primarily be street driven with occasional drag strip action. What size was factory install for a slant 6 in a wagon?
383, 727 and 8.75 diff, body weight 1540kg. I have got some listed below from mancini racing. Thanks Eddy MOPAR - .810" Diameter - "A" body MOPAR - .870" Diameter - "A" body MOPAR - .890" Diameter - "A" body MOPAR - .920" Diameter - "A" body MOPAR - .990" Diameter - "A" body MOPAR - 1.040" Diameter - "A" body MOPAR - 1.090" Diameter - "A" body MOPAR - 1.140" Diameter - "A" body |
#2
|
||||
|
||||
I would venture a guess that the smallest ones are for slant six.These will give you your best launch but if you want to corner well with a heavier engine larger ones would be best.
|
#3
|
||||
|
||||
The .920 is the biggest one that you will need for propper highway driving. If it's a drag only car, use the .870 since it's a big block car. For street driving, Mopars like soft t bars and springs with large sway bars on both ends and an agressive shock package that you want find over the counter in local parts stores.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clutch Recomendations | Green66 | Performance Talk | 5 | 03-07-2008 05:09 PM |
Compression recomendations? | b-body-will | Performance Talk | 2 | 10-01-2005 09:47 PM |
Need some Cam recomendations. | tlh101 | Performance Talk | 2 | 09-01-2002 07:55 PM |
tire recomendations | Ram Tuff | Ram Truck Chat | 8 | 11-04-2001 07:14 PM |
Reading recomendations......... :) | Dr. Righteous | Performance Talk | 3 | 05-05-2001 11:25 PM |